Grotech Distribution UK

Tel: 01268 799828
pH55_big

pH55 Pocket-size pH / Temperature Meter with replaceable electrode

IP65 Waterproof pH tester with Large dual-level LCD that displays pH and temperature (C or F). The large display shows readings in an extended range from -2.0 to 16.0 pH and simultaneously shows temperature from -5.0 to 105.0C or 23.0 to 221.0F.

pH55 has a stability indicator and hold function that freezes the display for easy and accurate recording. The large display also has graphic symbols to guide you through all operations. Complete with a temperature probe for faster and more precise temperature measurement it compensates automatically for temperature.
Calibration is made automatically in 1 or 2 points with memorized standard and NIST buffer sets. Auto power OFF saves battery power after non-use. The double-junction electrode can be replaced in a very fast and simple way! The modular design allows easy electrode and battery replacement.
pH/Temp waterproof tester with automatic calibration in 2 points, range -2.0 to 16.0 pH / -5.0 to 60.0C, accuracy of 0.1 pH, automatic temperature compensation. Supplied with interchangeable
pH electrode Mi56P.

PH55: Ph pen meter You Must Signin To See Prices
EC60_big

EC59 Pocket-size Conductivity / TDS / Temperature Meter with replaceable electrode

This new waterproof Pocket-size EC/TDS/Temp Meter include features such as a replaceable probe, temperature in C or F, automatic temperature compensation with adjustable , battery level indicator, stability indicator, automatic shut-off and automatic calibration all in a floating, waterproof casing.

EC59 shows on the dual-level LCD the EC (20.00 mS/cm) or TDS (10.00 ppt) value. It also displays the temperature from 0.0 to 60.0C (or 32.0 to 140.0F) on the secondary level at the same time.
EC/TDS/Temp waterproof tester with automatic calibration in 2 points, range: 0.00 20.00 mS/cm / 0.00 10.00 ppt / -5.0 to 60.0C, accuracy of 2% f.s. and automatic temperature compensation.
Supplied with interchangeable EC/TDS/Temp probe Mi59P.

EC59: EC pen meter You Must Signin To See Prices
MW100_big

MW100 Standard Portable pH Meter with 0.1 pH resolution

Standard portable meters with no frills! Milwaukees durable meters for quick and reliable measurements.
Milwaukees Standard meters are manufactured to be easy to use, practical and accurate. Ideal for the classroom, laboratory or for general field use.
MW100 performs pH measurements with a 0.1 pH resolution and with manual temperature compensation. The meter is supplied with pH electrode and calibration solutions.
pH meter, range: 0.0 to 14.0, with 2 point manual calibration, 0.2 pH accuracy. Supplied with SE220 double junction pH electrode, 9V battery, 20 mL. pH 7.01 sachet buffer solution and screwdriver for calibration.

MW100: Standard Portable pH Meter You Must Signin To See Prices
MW302_big

MW302 Standard Portable Conductivity Meter

MW302 is a Conductivity Portable Meter, with Automatic Temperature Compensation, and is ideal for the educational and agricultural markets. Soil conductivity is checked before fertilizer application to pinpoint field needs and after fertilization to establish its effectiveness. The EC testing provides all agricultural operation with a method to optimize chemical applications and minimize operational cost.
This instrument has been designed to meet the Grower's need for equipment suited to the aggressive environments found in agricultural and hydroponics applications.
The MW302 has a range of 0.0 to 10.0 mS/cm with a 0.1 mS/cm resolution. The meter is supplied complete with Conductivity probe with 1 meter cable and calibration solution.
Conductivity meter range: 0.0 10.0 mS/cm with automatic temperature compensation and 1 point manual calibration. Supplied with SE520 conductivity probe, a 9V battery, a 20 mL 1,413 S/cm sachet buffer solution and screwdriver for calibration.

MW302: Standard Portable Conductivity Meter You Must Signin To See Prices
MW802_big

MW802 Standard Portable pH / Conductivity / TDS Combination Meter

3 meters in 1! This meter allows you to measure pH, EC (conductivity) and TDS with just one instrument and one single probe!
The MW802, with a conductivity range that goes up to 6.00 mS/cm and the TDS up to 4000 ppm is ideal for testing in crop production. Soil and well water pH that is too acidic or alkaline can have an adverse effect on plant nutrient and water uptake and directly effect the efficiency of fertilizer, herbicides and pesticides. Soil Conductivity is checked before fertilizer application to pinpoint field needs and after fertilization to establish its effectiveness.
Supplied with the SE600 interchangeable probe to measure pH, Conductivity and TDS. The pH electrode utilizes a fiber junction to reduce contamination when measuring fertilizer solutions. Both meters calibrate manually in pH, Conductivity and TDS.
Smart pH/EC/TDS combined meter range: 0.00 14.00 ph, 0 4000 ppm, 0.00 6.00 mS/cm, accuracy 0.20 pH and 2% full scale for EC and TDS. Supplied with SE600 combination electrode, a 9V battery, a 20 mL sachet buffer solution of pH 7.01, 1500 ppm and 1.413 S/cm.

MW802: Standard Portable Combination Meter You Must Signin To See Prices
mc310_300x300

Conductivity monitor MC310

The MC Monitors are designed to continuously monitor pH, EC or TDS values directly in your reservoir. Each unit features a user selectable set-point. An LED visual alarm is activated and flashes when the pH, EC or TDS level rises either Above or Below (user selected) that set-point.
All these instruments run on a 12V adapter so there's no need to worry about failed batteries and each unit comes with mounting kit, probe, probe holder and starter calibration solution.
Professional pH monitor especially designed for use with aquariums.
User selectable Hi/Low Set Point
Manual 2 points calibration
Visual LED alarm
Supplied with 12 VDC adapter, mounting kit, and 20ml pH 7.01 calibration solution, double junction pH electrode with 2m cable (BNC connector)
Conductivity monitor range: 0.0 10.0 mS with accuracy of 2% full scale and with 1 point manual calibration and automatic temperature compensation. Set point range 1.50 to 3.0 mS/cm, and led visual alarm active when reading is higher or lower than set point. Supplied with 12 VDC power adapter, MA812/2 conductivity probe and 20 mL 1,413 S/cm sachet buffer solution and screwdriver for calibration.

MC310: Conductivity monitor You Must Signin To See Prices
mc110_300x300

PH monitor MC110

The MC Monitors are designed to continuously monitor pH, EC or TDS values directly in your reservoir. Each unit features a user selectable set-point. An LED visual alarm is activated and flashes when the pH, EC or TDS level rises either Above or Below (user selected) that set-point.
All these instruments run on a 12V adapter so there's no need to worry about failed batteries and each unit comes with mounting kit, probe, probe holder and starter calibration solution.
Professional pH monitor especially designed for use with aquariums.
User selectable Hi/Low Set Point
Manual 2 points calibration
Visual LED alarm
Supplied with 12 VDC adapter, mounting kit, and 20ml pH 7.01 calibration solution, double junction pH electrode with 2m cable (BNC connector)
pH monitor, range: 0.0 to 14.0, with 2 point manual calibration, and accuracy of 0.2 pH. Set point range: 3.5 to 7.5 pH, and led visual alarm active when reading is higher or lower than set point. Supplied with 12 VDC power adapter, MA911B/2 double junction pH electrode, 20 mL pH 7.01 buffer solution and screwdriver for calibration.

MC110: PH monitor You Must Signin To See Prices
Mi59P

EC/TDS/Temp probe for EC59

EC/TDS/Temp probe for EC59

Mi59P: EC/TDS/Temp probe for EC60 You Must Signin To See Prices
MI56P

pH/Temp probe for pH55

pH/Temp probe for pH55

Mi50P: pH/Temp probe for pH55 You Must Signin To See Prices
se600

PH probe for MW100

Double junction, gel filled pH electrode with BNC connector, with 1 or 3 meter cable

SE220: PH probe for MW100 You Must Signin To See Prices
se520

Conductivity/TDS probe for MW302

Conductivity/TDS probe with DIN connector and 1 meter cable
for MW302

SE520: Conductivity/TDS probe for MW302 You Must Signin To See Prices
Ma812 2

Conductivity/TDS probe for MC310

Conductivity/TDS probe with 1 meter cable
for MC310

MA812/2: Conductivity/TDS probe for MC310 You Must Signin To See Prices
MA911B

PH electrode for MC110

Double junction, gel filled pH electrode with BNC connector, with 2 meter cable

MA911B/1: PH electrode for MC110 You Must Signin To See Prices
se600

Combination probe for pH/EC/TDSprobe

Combination probe for pH/EC/TDS with 1 meter cable for MW802.

SE600: Combination probe for pH/EC/TDSprobe You Must Signin To See Prices

call 01268 799829 for all your wholesale hydroponic needs

Grotech Distribution Logo | Hydroponics Suppliers UK Wide
© 2012 www.locallife.co.uk