Grotech Distribution UK

Tel: 01268 799828
Therm B1 (2)

Therm-B1

The THERM-B1 is designed to activate a cooling or heating device up to 15-amps.
1. The user selects separate Day and Night temperature settings using the 2 separate knobs on the front of the unit.
2. A digital microprocessor and solid state temperature sensor are combined to create an accurate and reliable method to control temperature between 45 and 95ºF or 7 and 35ºC.
3. A built-in photocell automatically activates the unit correctly based on Day or Night lighting levels.
4. Can be adjusted to activate a heating or a cooling device by selecting the desired mode.
5. A fixed "dead-band "of 2 degree provides accurate control for your cooling or heating device.

Specification:

Maximum amperage: 10 amps @ 230 VAC 14.5 amps @ 120 VAC
Temperature control range: 7 to 35 ºC
Separate Day & Night settings *photocell control
Temperature accuracy: +/- 1 ºC
Temperature dead-band (hysteresis) 2 ºC
Weight : < .5 kg
Dimensions: 140 x 75 x 70 mm

THERMB1: Therm B-1 analogue fan controller You Must Signin To See Prices
VAP B1 (2)

Vapour B1

The VAPOR -B1 is designed to control a humidification or dehumidification device.
1.A digital microprocessor and solid state humidity sensor are combined to create an accurate and reliable method to control your humidity between 20 and 90% rH.
2. The user selects separate Day and Night humidity settings using the 2 separate knobs on the front of the unit.
3.A built-in photocell automatically activates the unit correctly based on Day or Night lighting levels.
4.The unit can be adjusted to activate a humidifier or a dehumidifier by selecting the desired mode.

Specification:

Maximum amperage: 10 amps @ 230 VAC 14.5 amps @ 120 VAC
Humidity control range: 20 -90% rH
Separate Day & Night settings *photocell control
Humidity accuracy: +/- 5% rH
Humidity dead-band (hysteresis): 5% rH
Weight: < .5 kg
Dimensions: 140 x 75 x 70 mm

VAPORB1: Vapour B-1 analogue fan controller You Must Signin To See Prices
D1 TMP

D1-TMP

D1-TMP/Digital Temperature Controller
The D1-TMP Digital Day/Night temperature controller is a very accurate device that allows the user to control EITHER a cooling or heating device.
1. A two meter long water-proof remote temperature sensor can be placed where it can sense the water or air temperature that the D1-TMP will be controlling.
2. The user first selects whether they are controlling a cooling or a heating device.
3. Feature with Day and Night temperature settings, as well as the deadband (hysteresis). Separate Day and Night settings are critical in order to maintain proper temperatures during periods of light and darkness.
4. Works by measuring the temperature and switching ON or OFF the device connected to the D1-TMP when the temperature is at the user’s desired setpoint.
5. A built-in photocell automatically senses whether it is light of dark and will activate the correct user’s setpoint.

D1TMP: D1-TEMP Digital Temperature Controller You Must Signin To See Prices
D1 LIT (2)

D1-LIT

D1-LIT/Digital Lighting Controller
The D1-LIT provides all the control for your supplemental lighting ballast. The D1-LIT is a MUST HAVE for any serious grower using supplemental lighting.

1.It features an accurate 24-hour digital timeclock. The user selects the time that the lights will be turn ON and OFF.
2.Measure the temperature inside the growing area and to shut off the lights if the temperature exceeds a safe level.
3.User can select the Maximum Temperature setting.
4.The two meter long remote temperature sensor probe / cable gives the user many options when installing the unit.
5.D1-LIT’s “Hot-start prevention” feature which will automatically detect a power failure (power interruption) and shut off the lights until they have cooled down properly. (This is critical to the safe operation of HID ballasts) The user again selects the amount of time-delay for the lights to be returned to normal operation.

D1LIT: D1-LIT Digital Lighting Controller You Must Signin To See Prices
AC1 (2)

AC-1

The AC-1 is an extremely simple solution for controlling temperature and humidity inside an enclosed area. The AC-1 is the first basic atmosphere controller that maintains a perfect balance between cost and accuracy. The AC-1 is simple, but it is also flexible enough to cover a wide range of applications.

The AC-1 combines precision solid-state temperature, humidity and light sensors with a reliably engineered circuit board. The user selects their desired temperature, humidity and appropriate mode of operation for the unit. Once the simple set-up is complete, just plug in the external equipment such as fans, dehumidifiers and CO2 equipment,and the AC-1 does the rest.

1. Control a cooling device such as a fan or an air conditioner.
2. Control a dehumidifier OR a humidifier. (user selectable)
3. Built-in photocell that can activate a CO2 device during the day. Can be coordinated with the exhaust fans.
4.Offers multiple modes of operation that are user selectable (Dehumidify, humidify, split or combine humidity and temperature control.)

Specification:

Maximum amperage: 10 amps @ 230 VAC 14.5 amps @ 120 VAC
Remote COMBO probe cable length: 5 meters
Temperature control range: 5º to 45º C
Temperature accuracy: +/- 1º C
Temperature dead-band (hysteresis): 1.5º C
Humidity control range: 5% to 95% rH
Humidity accuracy: +/- 3% rH
Humidity dead-band (hysteresis): 3% rH
CO2 control mode
activated with photocell
Weight: 2.5 kg
Dimensions main unit : 230 x 180 x 70mm
Dimensions remote sensor: 110 x 17mm

SPAC1: AC-1 Temp/humidity and Co2 controller You Must Signin To See Prices
AC2 (2)

AC-2

The AC-2 Basic Digital Atmosphere Controller monitors and controls the atmosphere of the growing area by using precision sensors that measure the air temperature, humidity and lighting levels. The AC-2 then uses this information to activate external fans, air conditioners, dehumidifiers, heaters and CO2 equipment as needed to maintain optimum levels for indoor agriculture. What sets the AC-2 apart from the competition?

1. Control temperature, humidity, CO2 and MORE.
2. Has separate settings for Day and Night.
3. Simple to operate, no confusing menus or complicated settings
4. The AC-2's remote digital temperature, humidity, and light sensor assembly can be located up to 5 meters from the main controller enclosure.
5. Built-in, TIMED CO2 control function making CO2 use easy and inexpensive. The CO2 Timer could also be used as a daytime recycle timer to control a recycling pump, fan etc.
6. Measures and stores the Maximum and Minimum temperature and humidity levels to allow the user to quickly verify the equipment is working correctly and predictably.

Specification:

Maximum amperage: 10 amps @ 230 VAC 14.5 amps @ 120 VAC
Remote COMBO probe cable length: 5 meters
Temperature control range: 5º to 45º C
Temperature accuracy: +/- 1º C
Temperature dead-band (hysteresis) adjustable
Humidity control range: 5% to 95% rH
Humidity accuracy: +/- 3% rH
Humidity dead-band (hysteresis) adjustable
CO2 control type: adjustable timers
CO2 ON timer setting range: 1 second to 12 hours
CO2 OFF timer setting range: 1 second to 96 hours
Weight: 2.5 kg
Dimensions main unit: 230 x 180 x 70mm
Dimensions remote sensor: 110 x 17mm

SPAC2: AC-2 Basic Digital Atmosphere Controller You Must Signin To See Prices

call 01268 799829 for all your wholesale hydroponic needs

Grotech Distribution Logo | Hydroponics Suppliers UK Wide
© 2012 www.locallife.co.uk